Processing Technology of Titanium Alloy for High - speed Planting Machine

　　Stability is the key to success. Some brush machinery find that titanium is difficult to process effectively, but this view does not represent the development trend of modern processing methods and tools. The reason is difficult, and some reason is that titanium metal processing attributed to the new technology, short can learn the experience. In addition, hardships are often associated with expectations and operator experience, and in particular, some people are now accustomed to the processing of materials such as cast iron or low alloy steels, which require very low processing needs. In contrast, the processing of titanium metal can not use the same tool and the same rate, and the number of life of the tool is not the same, even with some stainless steel, titanium processing is still much more difficult. Processing of titanium metal is necessary to adopt a different cutting speed and the amount of feed and the necessary preventive measures. Compared with most of the data, titanium is also a completely direct processing of the information. Only the titanium workpiece stability, clamping strong, accurate selection of machine tools, power suitable, excellent working conditions, and equipped with a shorter tool extension of the BT50 spindle, then all the questions will be easy to solve. However, in the practice of milling, titanium metal processing conditions are not simple and satisfactory, because it does not always have the ideal stability conditions. In addition, many titanium parts of the shape of the mess, may include a lot of fine or far-reaching cavity, thin wall, slope and thin bracket. To successfully process such parts, you need to use large.


　　Most of the brush tufting machine manufacturers on the titanium processing are at arm's length, because the titanium alloy is indeed difficult to process. If the appropriate tool is selected and used properly, and in accordance with the needs of titanium processing equipment and equipment to optimize the best condition, titanium processing can be completely satisfactory high performance and complete results.

Compared with most other metal materials processing, titanium processing is not only higher demand, and more constraints. This is due to the metallurgical properties and characteristics of the titanium alloy may have a serious impact on the cutting action and the information itself.
　　Titanium's various features make it a compelling piece of material, but many of the features together also affect its machinability. Titanium has excellent strength - component ratio, its density is usually only 60% of steel. The elastic modulus of titanium is lower than that of steel, so the texture is harder and the deflection is better, and the corrosion resistance of titanium is better than that of stainless steel. These features mean that the titanium metal in the processing process will attack a higher and more set of cutting force. It is a simple attack vibration caused by cutting when the tremor; it is simple when cutting with cutting tool information should be, and then increase the crescent worn wear. In addition, it is poor thermal conductivity, because the heat will be concentrated in the cutting area, so the processing of titanium metal knife is necessary to have high thermal hardness.